CivilFEM Online Help

~PRSTR

 

~PRSTR, LabSTR, LabNode, LabTYP, ENTNUM, LabSTR2, LabSTR3, LabSTR4, LabSTR5, LabSTR6

Lists stresses and strains in beam and shell elements and solid sections.

POST1: Beam & Shell Utilities

LabSTR

Entity to be listed. Allowable values are:

SX	SX stresses
SY	SY stresses
SZ	SZ stresses
SXY	SXY stresses
SYZ	SYZ stresses
SXZ	SXZ stresses
S	All stresses
EPX	eX elastic strains
EPY	eY elastic strains
EPZ	eZ elastic strains
EPXY	eXY elastic strains
EPYZ	eYZ elastic strains
EPXZ	eXZ elastic strains
EP	All elastic strains

LabNode

Cross section or element vertex to be listed. For beam elements cross sections, valid labels are:

I	I section.
J	J section.
BOTH	Both sections (default option).

For shell element vertices, valid labels are the following:

I	Vertex I
J	Vertex J
K	Vertex K
L	Vertex L
ALL	All vertices (default option).

For solid sections, labels are the following:

N	Number of solid section.
ALLS	All solid sections (default option).

LabTYP

List type.

POINTS	List in all points of the section (default option).
PLATES	List in all plates of the section. Only valid for beam elements.
TESSELUM	List in all tessella of the section. Only valid for beam elements.
REINF	List in all reinforcements of section. Only valid for beam elements.

ENTNUM

It depends on the LabTYP label.

ALL	List results in all points, plates, tessella and reinforcements of the section (default option). For shell elements the results are listed for points 1 (top fiber) and 2 (bottom fiber).
MINMAX	List of maximum and minimum values of the section. It is only valid if LabTYP = POINTS.
N	Number of entity to be listed (point, plates, reinforcement or tessella).

LabSTR2, LabSTR3, LabSTR4, LabSTR5, LabSTR6

Additional stresses and strains to be listed.

Notes

- This command lists stresses and strains in selected beam and shell elements and in the indicated solid section. For beam elements, only SX and EPSX are available.

- The shell elements have two points that represent the top fiber (point 1) and bottom fiber (point 2) of the element.

Menus Path

Main Menu > CIVIL Postprocessor > Shell Utilities > LIST RESULTS: Stress & Strain

Main Menu > CIVIL Postprocessor > Code Checking > ###### > BEAM RESULTS: Beam Utilities > LIST RESULTS: Stress & Strain

Where ###### represents the active code (reinforced concrete or structural steel).

¾¾¾¾¾¾¨¾¾¾¾¾¾