CivilFEM Online Help

~CSLST

 

~CSLST, SEC1, SEC2, INC, KEYTYPE, KGEN, KDIM, KPOI, KTES, KPLA, KFAC, KREI, KBOU, KMEC, KSTR, KCOD, KSECT

Lists CivilFEM cross section’s properties

PREP7: Cross Sections

SEC1

Number of the first cross section to be listed.

SEC2

Number of the last cross section to be listed (by default SEC2=SEC1)

INC

Increment between cross sections to be listed.

KEYTYPE

Label indicating type of listing:

0	Short list (Default value)
1	Detailed list

KGEN

List cross section general properties

0	NO (Default value)
1	YES

KDIM

List cross section dimensions

0	NO (Default value)
1	YES

KPOI

List cross section points

0	NO (Default value)
1	YES

KTES

List cross section tessella

0	NO (Default value)
1	YES

KPLA

List cross section shells

0	NO (Default value)
1	YES

KFAC

List cross section faces

0	NO (Default value)
1	YES

KREI

List cross section reinforcements

0	NO (Default value)
1	YES

KBOU

List cross section boundary conditions

0	NO (Default value)
1	YES

KMEC

List cross section mechanical properties

0	NO (Default value)
1	YES

KSTR

List cross section mechanical properties used in structural analysis

0	NO (Default value)
1	YES

KCOD

List cross section code properties

0	NO (Default value)
1	YES

Notes

- For KEYTYPE=0 (short list) the other command fields are ignored. For KEYTYPE=1 (Detailed list) the other fields must be activated in order to obtain a list of the properties. In case the other fields are equal to 0 (option by default), it will only be listed the name of the cross section.

Menu Paths

Main Menu > Civil Preprocessor > Cross Sections > List

¾¾¾¾¾¾¨¾¾¾¾¾¾