CivilFEM Online Help

~DASEEP

 

~DASEEP, Lab1, A1

Generates a seepage boundary condition on an area.

PREP7 : GEOTECHNICAL MODULE: Seepage

SOLUTION : GEOTECHNICAL MODULE: Seepage

 

Depending on the operation type to be executed, this command may assume the different forms that are stated below.

 

~DASEEP, ADD, A1

 

Lab1	Description
ADD	Generates the seepage boundary condition in the area indicated in the A1 field.

A1

Area where the boundary condition is applied.

 

~DASEEP, DEL, A1

 

Lab1	Description
DEL	Deletes the seepage boundary condition from the area indicated in the A1 field.

A1

Area from where the seepage boundary condition is deleted.

 

~DASEEP, CLEAR

 

Lab1	Description
CLEAR	Deletes the seepage boundary conditions from all the areas.

Note

- This command is only valid in 3D models.

- The piezometric heights are measured along global Z axis.

Menu Path

Main Menu > CIVIL Preprocessor > Geotech. Mod. > Seepage – Define > Seep on area

Main Menu > CIVIL Preprocessor > Geotech. Mod. > Seepage – Delete > Seep on area

Main Menu > CIVIL Preprocessor > Geotech. Mod. > Seepage – Delete > Seep on All areas

¾¾¾¾¾¾¨¾¾¾¾¾¾