CivilFEM Online Help

~SBPAR

 

~SBPAR, MD, B, H,LabASB, LabAST, MCBOT, MCTOP, FCD, FYD, ES

Designs a rectangular section under bending moment by parameters

POST1: Concrete Checking

MD

Design bending moment solicited by the section.

B

Section width.

H

Section depth.

LabASB

User label where the value of the total area of the lower reinforcement will be stored.

LabAST

User label where the value of the total area of the upper reinforcement will be stored.

MCBOT

Mechanical cover at bottom.

MCTOP

Mechanical cover at top.

FCD

Design value of the concrete compression strength.

FYD

Design strength of the reinforcement steel.

ES

Elasticity modulus of the reinforcement steel.

Notes

- The purpose of this command is to provide a quick and simple tool to quickly design and estimate your section’s reinforcement, without the need of defining elements, sections or materials in the model. This command may be used at any time.

- This command designs a rectangular section under bending moment defined by the parameters introduced in different fields and returns the total area of the lower and upper reinforcement, storing these values in the labels indicated by the user. Labels LabASB and LabAST must have a maximum length of 8 characters.

Menu Paths

Main Menu > Civil Postprocessor > Code Checking > ###### > UTILITIES: Rectang Bending

Where ###### represents the active code (reinforced concrete).

¾¾¾¾¾¾¨¾¾¾¾¾¾