CivilFEM Online Help

~BLVD

 

~BLVD, j, Ini, P_{J, Ini}, P_{J, Ini+1}, ..., P_{J, n}

Definition of loads in the wheels

SOLUTION: BRIDGE AND CIVIL NON LINEARITIES: Bridge model loads

j

Row number where the loads are defined (one by column).

Ini      

Column number where the loads definition starts.

P_{J, I}

Load value in the intersection point of column I with row J.

Notes

- This command must be included in the loop of vehicle definition, the beginning of which is carried out with the ~BLVST command and ends with the ~BLVEND command.

- The command ~BLVD should be executed after the commands ~BLVA and ~BLVB once the parameters m and n are defined.

- If a ~BLVD command is repeated with an I field different than zero, the previous P_{J, I} values are deleted.

- The loads will have a direction of the positive Z-axis. Therefore, in most cases, they must be entered negative in order to obtain the desired results.

Menu Paths

Main Menu > Civil Solution > Bridges Solu > Traffic Loads > Vehicle

¾¾¾¾¾¾¨¾¾¾¾¾¾