CivilFEM Online Help

~WALLINI

 

~WALLINI, XREF, NSTEP, DRAIN, SIDE1, UTER1, NSEC1, ZMAX1, HL1, DIST, UTER2, NSEC2, ZMAX2, HL2

Initializes the data in the retaining wall analysis

PREP7 : GEOTECHNICAL MODULE: Walls

XREF

X reference coordinate where the first wall will be placed.

NSTEP

Calculation step number.

DRAIN

Indicates whether there is water table drainage or not:

0	Yes.
1	No.

SIDE1

Side where the first wall excavation is taking place:

0	Right.
1	Left.

UTER1

Terrain number for the first retaining wall.

NSEC1

Number of different cross sections for the first wall.

ZMAX1

Top height for the first wall.

HL1

Horizontal length of the first wall (by default 1.0).

DIST

Distance among walls (a second wall is considered if DIST > 0)

UTER2

Terrain number for the second retaining wall.

NSEC2

Number of different cross sections for the second wall.

ZMAX2

Top height for the second wall.

HL2

Horizontal length of the second wall (by default 1.0.)

Notes

- This command defines the terrain to be used, the number of calculation steps and the number of different cross sections for the wall. If any of these wall characteristics is redefined, all entities associated to the wall (anchors, sections, excavations, etc) are deleted.

Menu Paths

Main Menu > CIVIL Preprocessor > Geotech. Mod. > Retaining wall > Initialize

¾¾¾¾¾¾¨¾¾¾¾¾¾