~DLHEAD

 

~DLHEAD, Lab1, L1, H

Generates a constant piezometric head as a boundary condition on a line.

PREP7 : GEOTECHNICAL MODULE: Seepage

SOLUTION : GEOTECHNICAL MODULE: Seepage

 

Depending on the operation type to be executed, this command may assume the different forms that are stated below.

~DLHEAD, ADD, L1, H

 

Lab1	Description
ADD	Creates a constant piezometric head condition over the line indicated in the L1 field.

L1

Line where the boundary condition is applied.

H

Piezometric head to be applied.

~DLHEAD, DEL, L1

 

Lab1	Description
DEL	Deletes the constant piezometric head condition of the line L1.

L1

Line from where the boundary condition is deleted.

~DLHEAD, CLEAR

 

Lab1	Description
CLEAR	Deletes the constant piezometric head condition from the all the lines.

Note

This command is only valid in 2D problems.

Menu Path

Main Menu > CIVIL Preprocessor > Geotech. Mod. > Seepage – Define > Cnt Head on line

Main Menu > CIVIL Preprocessor > Geotech. Mod. > Seepage – Delete > Cnt Head on line

Main Menu > CIVIL Preprocessor > Geotech. Mod. > Seepage – Delete > Cnt Head on All lines

¾¾¾¾¾¾¨¾¾¾¾¾¾