CivilFEM Online Help

~WTSOLVE

 

~WTSOLVE

Initialize the model optimization solver

SOLUTION : GEOTECHNICAL MODULE: Seepage

Notes

- This command initializes an interactive calculation process of the saturation line based on the least square method. Many ANSYS solves are performed during interactions in which the position of the calculation points of the saturation line, defined using ~WATTAB command, is modified. This implies the regeneration and remesh of the model and that is why it is necessary to mesh the model using ~SEEPMOD command.

- In case of convergence problems, the calculation may be interrupted due to crossing lines. In this case, it is advisable to review the model and make some changes in the number of calculation points or in the EQTYP options of ~WATTAB command.

Menu Path

Main Menu > CIVIL Solution > Geotech. Mod. > Seepage > Solve Water Table

¾¾¾¾¾¾¨¾¾¾¾¾¾